HammerHead Showers Dual Shower Head Combo, 8-Inch Rainfall & 3-Flow Handheld, Brushed Nickel, 2.5 GPM

IN-DEPTH HONEST REVIEW
If you have ever read my reviews, then you know I will and have scrutinized and put products to my tests, but I usually do my reviews a couple weeks into my purchase unless it’s a common item. First off, when I picked up the box at my front door, I swear it was not what I expected as it had some serious weight to it. It comes brown boxed with a very nice printed on label, with an attention grabbing slogan inside the lid. Let’s just say when they built this product, they meant business. Each piece is contained inside of a drawstring lined bag. The main shower head is solid metal, with micro silicon rubber jets. It’s got such a reflective property to it your could use it as a mirror, the selector knob acts as if it’s got a bearing with a positive click selection for both the wand and shower head or individually. The logo is laser etched into the selector valve as well. The wand is something I would carry with me if I wanted to protect myself against shower predators! It’s solid with a standard pressure, a high pressure, and a mist type of selection for water. I opted for the 108” wand hose as an extra part as well. Added some teflon tape to the wall pipe and tightened it down, don’t over tighten, it’s not needed. Just hand tighten the set screws, don’t over tighten them. Add the shower head first, then the supply line to the tap and then connect the supply line to the wand, hand tighten that part as well. There are dual seals for the wand one inside the connector and one on the wand. The hose is very flexible and covered in a metal housing. After it’s all installed, run it for about 2 minutes to clear out the lines, yes you will see some discolored water, but you will also see this when you change out fridge water filters and purge the lines.I had to take a shower just to try it out and I was quite surprised at the pressure. I have been shopping at the big box stores to actually see what was the best. ALL of them were plastic or had plastic parts. This one is all metal and based on my experience of having an all metal one many years back, this will be a top winner.Hammerhead thought this out and delivered an outstanding product. I was skeptical at first, but I watched the reviews increase and for a majority they all agreed that this is a well made product. We all know that the water the comes into our home, does eventually cause sediment build up and it make the water pressure drop, and damages the shower heads from clogging. Since this is metal, and parts can be replaced I see it working well into the future. My last shower head only lasted about 2 years. So let’s see what this one will do.You do get extra washer seals, rubber jets, teflon tape, an Allan key, and warranty cards. I installed mine after I brought it in the house. I have been comparing many of them including the big names over priced companies which still make them plastic.I will post an update to see how well it’s holding up. But for now, I will support their company. No, I didn’t get this as a promo, or ask to write about my experience. But I support great products and my reviews are up front and honest. Thanks hammerhead!!!!

Best Shower Head Ever!
HammerHead wildly exceeded expectations! We wanted a large shower head with an auxiliary wand attachment. FIrst up was Delta, about $140, plastic, performed okay, then the wand cradle broke. Poor design. Returned it and bought Moen, $125, plastic, tough to install. Plastic and rubber washers poor quality, ended up leaking at the shower arm and then the diverter failed so that head or wand were no longer independent. Returned to Home Depot. Researched online and found HammerHead.We purchased this unit and a shower arm. When they arrived, I was immediately impressed by the weight, feel and quality of the manufacturing. Installation instructions were simple – I followed them exactly, even making sure I wrapped threads exactly 3-4 times with plumber’s tape. Unlike with the other brands, there was no fiddling around trying to get the parts to thread on correctly or finding the exact right amount of torque to eliminate leaks. Spare washers and parts were even included.HammerHead performed flawlessly from first use, and after a few weeks, we’ve realized a new level of shower happiness! The volume of water flow is better, the controls click nicely and the diverter is sure and exact.I thought I would have to spend $400-500 for a proper, quality shower head. For under $250 for both head unit and arm, we got premium quality and performance. We’ll be buying a shower head for our other bath, and when the time comes to retile, the mixing valves and trim kits.I didn’t know you could buy quality fixtures made of stainless steel and brass without emptying the wallet. Thanks, HammerHead.

Needs Shutoff Valve
Neither showerhead nor handheld come with shut off valves. My husband’s hip broke and he sits to shower. Having water running, he cannot reach faucet, the whole time he is washing is such a waste of water. We love it is all metal, seems excellent quality, its easy installation, its looks. But I had to put a shut off on, at least, the handheld.