Magnetic Reed Switch NO Surface Mount Wired Door Window Contact Sensor with Cover for Home Security and Burglar Alarm Systems MC-31 5pcs

$13.99

Note: Prices may fluctuate as sellers adjust them regularly. You'll see the latest price at final checkout.
Description



Differences of NC, NO, NC/NO
Normally Closed(NC): When the switch is close to the magnet, the circuit is conductive(light on); when the switch is separated from the magnet, the circuit is not conductive(light off).
Normally Opened(NO): When the switch is separated from the magnet, the circuit is conductive(light on); When the switch is close to the magnet, the circuit is not conductive(light off).
NC/NO Combined: The switch has 3 contact types: NC/NO/COM, you can choose to connect two of the contacts(NC-COM or NO-COM).


PLEASE NOTE
A magnetic door contact can only provide a switching signal to the device. It cannot directly load the power supply and cannot be directly connected to the lamp.


Specifications:
Model: MC-31
Contact Type: NO
Maximum Sensor Sensitivity: 16mm(+/-5mm)
Load Current: 150mA
Maximum Voltage: 100V DC
Mounting Hole Distance: 52mm / 2.05inch
Size(Approx.):
64 x 20 x 13mm / 2.52 x 0.79 x 0.51inch (L*W*H)
64 x 13 x 13mm / 2.52 x 0.51 x 0.51inch (L*W*H)
Housing Material: ABS


Package Content:
5pcs x Magnetic Door Switch
20pcs x Mounting Screws
MATERIAL – The switch housing is made of ABS flame retardant material and the reed switch is resistant to high temperature and deformation.
NORMALLY OPEN(NO) – When the switch is separated from the magnet, the circuit is conductive(light on); When the switch is close to the magnet, the circuit is not conductive(light off).
ACTUATION DISTANCE – 11-21mm transmitting distance. The contact has fast reflection and accurate detection.
WORKING CONDITIONS – Load Current: 150mA; Maximum Voltage: 100V DC. The terminal has a detachable cover, which is more beautiful after installation.
WIDE APPLICATIONS – Work with all access control and burglar alarm systems. Can be installed in wooden or aluminum alloy doors and windows.

Reviews (8)

8 reviews for Magnetic Reed Switch NO Surface Mount Wired Door Window Contact Sensor with Cover for Home Security and Burglar Alarm Systems MC-31 5pcs

  1. Steven Kung

    It Works!
    I had my door replaced. Upon removal of the old door, the existing reed switch hardware was thrown out with it. I wasn’t sure if I should purchase the normally closed or normally open version of the switch. On a whim I was guessing that they meant if the door or window is normally open or closed for the perimeter alarm to arm successfully. So, being that my door is normally closed, I bought the NC (normally closed) version. I connect the existing wires from the alarm wiring to the switch and tried it. Voila! It worked.

  2. Rudy

    Didn’t need five of them.but oh well
    I liked that they have a cover for the terminations

  3. bbd

    Work but Fragile
    The reed switches work fine BUT I have a high failure rate when installed. Order extras over your required amount.

  4. Amazon Customer

    They don’t Clearly define what NO – Normally Open actually means with their Magnetic Switch.
    It’s not clear as to how they define the term NO – meaning “Normally Open”. I interpreted it to mean that the switch is open until when the magnet piece gets close enough to close the switch. Apparently that’s not the case. All of the switches I received in the package are NC – meaning Normally Closed until the magnet piece is close enough to make them Open. I’m going to have to return my units because of this.

  5. peggy

    Reliable
    Very reliable product and they were easy to install. So far they have performed to my expectations and for the price a good vise for the money. You won’t be disappointed in this product

  6. Amazon Customer

    Perfect part for the job.
    This door switch worked perfectly for the job. I couldn’t ask for a better switch.

  7. nh19926

    Contact position is (not) consistent. Wiper reversed on some.
    Sent seller a message about quality control issue. I checked each item before installing with my meter. I found that some of the switches had the Wiper reversed …. wiper was on the “right” side screw terminal, and others were on the “left” screw terminal. Easy to fix, but headache if I have to sit and meter each piece to make sure the made it correctly, and to avoid any alarm issues. Had to mark each switch with a marker to be sure they were wired correctly.

  8. Giddy Up

    Works great for a door actuator
    I used it for a door opener to signal when the door is open

Add a review

Your email address will not be published. Required fields are marked *

78 − = 68
Powered by MathCaptcha

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.