30A Hight Power WiFi Wireless Smart Switch, DIY Module for Smart Home Automation, ewelink APP Remote Control, Timer, Compatible with Alexa & Google Home
$16.99
Product description
Where is the product used?
Our 30A smart switch can make traditional electrical appliances intelligent, enabling users to save electricity and enjoy a smart life. Commonly used household appliances include hot water heater, bathroom extractor fans, water pump motor, light, etc.
Technical Details
Name eWeLink 30A Wifi Smart Switch Voltage 120V AC / 240V AC WIFI Standard WIFI (802.11 b/g/n 2.4GHZ) APP eWeLink Wattage with 6000 watt resistive load, 800 watt inductive load. Function 1 Remote turn on or turn off Function 2 Timing Schedules Function 3 Device Sharing Function 4 Create automated scenario Function 5 Works with Alexa and Google home
How to pair it with the eWeLink APP?
1.Search for “eWeLink” in the APP Store or Google Play, then download and install it.
2.Register an account.
3.Turn on the Bluetooth of your mobile phone and select the 2.4G WiFi frequency.
4.Power on the device. The device will automatically enter the network configuration mode (The indicator light flashes twice and stays on steadily once.). If not, please press and hold the pairing button for 5-7 seconds).
Method 1: Quickly pairing mode:
Click “+” to add a device. Click the “Next”,The app will automatically search for devices，Then click “+”, click “Next”, click “Next”，Click “Done”.
How to pair it with the eWeLink APP?
Method 2: Compatible Pairing mode
Click “+” to add a device,Click the compatibility Compatible button at the bottom. press the pairing button until led flash blink constanly(press and hold around 7-15s)
, then click “Next”,enter wifi name,go to connect “ITEAD-xxxxxxxx”,password:12345678, After connecting, click “Allow” to connect to the previous Wi-Fi network, and the pairing is completed.
Works with Amazon Alexa & Google Home Assistant
How to connect to third-party application such as alexa and google assistant?
Click the Profile in the ewelink APP, click the work with button, and display the binding methods for various Smart speakers. For specific methods, please refer to the ewelink APP.
How to set up an independent 2.4G WiFi?
Q: How do I set up a dual-band router to broadcast only a separate 2.4GHz Wi-Fi network?
A: The specific steps may vary depending on the router brand, but the general process is to log in to the router’s management interface, locate the option to disable band steering (or Smart Connect), and then configure the 2.4GHz network settings separately.
【 High-Powered 】Works with most AC-powered devices up to 30A, such as air compressor,water pump motor,hot water heater and High-power electrical appliances, making it a versatile choice for your smart home needs.
【 APP Remote Control 】eWeLink APP enables you to control the devices anywhere with one tap via iOS & Android smart phone, no distance limitation. You can also track the devices real-time status anytime
【 Schedule Automatic Control 】By presetting timers or schedules on eWeLink App, a lamp can be automatically turned on/off at a specific time. Automate your home appliances via 3 timing types: scheduled timing, countdown timing and loop timing
【 Smart Scene 】 You can create smart scenes in order that one device can trigger on/off another one or gather multiple devices into one group and tap to run them together
【 Hands-free Voice Control 】WiFi Switch is compatible with Amazon Alexa ( Amazon Echo/Echo Dot/Amazon Tap) and Google Home. It allows you to use your voice to control home devices and enjoy hands-free experience.NOTE: 1.Please cut off the power before installing the device. 2.The router must be 2.4GHz (5.0 GHz WiFi is not supported), but there is no limitation for smart phone network (2G/3G/4G/WiFi network is ok).
User Manual:We provide instruction manuals in both Chinese and English. One side is in Chinese and the other side is in English.
13 reviews for 30A Hight Power WiFi Wireless Smart Switch, DIY Module for Smart Home Automation, ewelink APP Remote Control, Timer, Compatible with Alexa & Google Home
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Onfus –
Great for automating landscape lighting
We had an old mechanical clock driven switch for the landscape lights. As days get shorter or longer it was a hassle having to manually go and change the little screws. I removed the clocks snd installed this instead. Now the landscape lights are controlled by Alexa and turn on 20 minutes before sunset, whenever that is and off at midnight. Note that in USA for tis to be code, it will need to br installed inside a box. The box needs to br plastic, otherwise wifi will not connect.
MightyThor –
Compact and easy setup.
Very compact, fits inside a 2-gang outlet box with enough rooms for the incoming and outgoing circuits. Also easy to set up. The only thing to watch out for is the terminals are very tightly positioned. Need to use crimped spade terminals as terminal design not suitable for direct termination of #10 AWG wires.
Amazon Customer –
nice product
This is an awesome little switch, it was exactly what i wanted and needed, this thing works like a charm, once you figure out that it really is a double pole switch that is 240volts, 120 volts on each leg, your good to go. see the problem is that they label the contacts L and N which in the real world is line voltage and neutral, it should be labeled L1 and L2 because both the load terminals make or break with this switch, so it is very suitable for breaking both legs of 240volt circuit. what gave me the hint was the little motor symbols on each terminal. their description isn’t as clear as it could be. you can also use this for 120volts, in which the neutral leg would also break, it hooked up easily to my router, but needs to be guided to the 2.4 gz of a daul or tri band router, once that is done, awesome switch.
Shane –
In-service for 3 months now without issue – Household 50G Water Heater
Let me start with — The effort was worth it $$.The easy part… Adding this device to the power feed at the water heater. My electrician friend had it installed in about 10 min.The interesting not so easy part — Connection to the network and programming.- I struggled to connect to the network – This only connects to 2.4G, and I could not find it on my network.- I created a 2.4G and 5G mode and was able to find it and connected.- Programming took me a bit of time, but not too bad. I now have a weekday and weekend schedule and easily turn off the “On” part of the schedule to leave it off while on trips. Turn the schedule back on before I get home, remotely! :-)I have not had one issue with this smart switch since I got it running. My biggest upfront issue was the 2.4G connection. If you already have a visible 2.4G/5G network, your setup will be easier. You need to have a 2.4G Wi-Fi signal where this switch will be installed.
Silicon –
Overheating (fire danger)
This product is dangerously underbuilt. The internal electrical wiring is too small for the load it claims to handle. Even when used under normal, advertised conditions, it quickly overheats. After a short time, it stopped working completely.This is not just poor design — it’s potentially a fire hazard. If you’re looking for something safe and reliable, I strongly recommend avoiding this product.
TXgrandpa –
User Manual
Everyone complains that the user instructions are in Chinese! So, I had Microsoft translate them and here are the pertinent points:OCTBIOMO SMART SWITCHProduct User Manual/User ManualInput Voltage 90 – 250 vacOutput Voltage 90 – 250 vacCommunications WIFI / 802.11, 2.4GHzDimensions 89 x 43 x 30 mmPower/WiFi indicator light (red) Product parametersPairing button/manual switchInstallation instructionsPlease check the following before using this device● Your smartphone is connected to a network that can access the Internet.● The phone system version must be Android 5.0 or above or 10.0 or above;● The phone must be able to access the APP store and download A● If your wireless router is set with a Mac address, please go to the router backend and turn off the Mac filtering function.How to pair the device with the eWeLink APP● Download the Yiweilian APP eWeLinkThe following matters:2.4G network accessAndroid 5.0 or above or IOS● Connect your phone to 2.4GHz WiFi and turn on Bluetooth;● Press and hold the pairing button for more than 5 seconds, the indicator light flashes twice and stays on once, entering the network pairing mode.●Open the APP, click the bottom, select “Bluetooth Pairing”, click “Next”, and the APP will automatically scan for devices.● Click on the scanned device, then select the Wifi connected to your phone, confirm that the relevant information is correct, click “Save”, and wait for the device to be connected.Compatibility mode (AP)If the network pairing fails using the quick add mode, please use the “Compatible Mode (AP)” to pair.● Press and hold the pairing button for 5 seconds until the device indicator light flashes twice and once long, release the button, and press and hold the pairing button again for 5 seconds until the device indicator light flashes quickly. The device enters compatible mode.● Click “.” on the app interface and select “Compatible Mode”. First connect your mobile device to the WI-FI account: ITEAD- …………… Password: 12345678. Then return to the “E-WeChat” app, click “Next”, and wait for the pairing to be completed.●Click on the added device and click the settings icon in the upper right corner.
Laura –
Works well
Works well
famH –
Does what it should!
I installed this on my furnace power in place of the toggle switch and connected to wifi so I could cut the power power to furnace if I had indication of any malfunction (based on my smart thermostat data) while away. Problem that prompted me to do this was a sticking inducer relay on control board causing the inducer to run after heat signal was removed, preventing furnace from firing up the next time heat was called for. Since this switch relay coil is always energized for my need to provide power to the furnace, the switch is slightly warm, but not of any concern. Time will tell if this reduces life of this device. As an aside, I fixed my control board problem by swapping the ignitor relay (resistive load) and the inducer relay (a motor-inductive load) and have not had any sticking issues for the past month of frequent furnace operation.
Eduardo –
Funciona de maravilla para poder controlar cualquier aparato electrónico desde una lámpara que quieras automatizar para encendido/apagado hasta una bomba para agua, sólo funciona con conexión WiFi a 2.4 Ghz
Jon –
Dangerous. I should have taken note of the poor reviews – definitely did not handle anything close to 30amps. Burnt out after a few minutes use, this could have been a real concern if I had not been in the right place at the right time.
BUCKO –
Not very good product 😕
Cliente de Amazon –
Excelente calidad en el producto con óptimo funcionamiento
Jose Ramírez –
Llegó a tiempo,bien empacado. Se ve muy resistente. lo instale, hice pruebas y todo funcionó bien.lo queiero para activar una bomba con la cual riego una área verde. Cómo a estado lloviendo no lo he usado.