QWORK MC-31 Wired Surface-Mounted NC Magnetic Door Window Contact Sensor Alarm Reed Switch, White, Pack of 5 with 20 Screws
$6.25
Product description
Sensor
Product name: Surface-mounted Magnetic Door Switch, Type: MC-31, Color: White, Material: Plastic.
NC Type
NC means normally closed. If the magnet is closed to this switch, the signal is conductive, otherwise, if the magnet is far away from this switch, the signal is disconnected.
Sizes
64*12.*12mm and 64*20*12mm（L * W * H ), suitable for magnetic windows, doors, cabinets etc. Ideal for door, window security.
Package Content
Includes 5 Pcs Magnetic Door Switch with 20 Screws.
Product Information: Product name: Surface-mounted Magnetic Door Switch, Type: MC-31, Color: White, Material: Plastic
Specification: Contact Type: NC, Hole Dia.: 5.8mm, Actuation Distance: 8mm±18mm
Sizes: 64*12.*12mm and 64*20*12mm（L * W * H),pack of 5 with 20 screws.
NC Type: NC means normally closed. If the magnet is closed to this switch, the signal is conductive, otherwise, if the magnet is far away from this switch, the signal is disconnected.
Applications: It is suitable for magnetic windows, doors, cabinets etc. Ideal for door, window security.
13 reviews for QWORK MC-31 Wired Surface-Mounted NC Magnetic Door Window Contact Sensor Alarm Reed Switch, White, Pack of 5 with 20 Screws
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Stan –
Low cost perfect solution
Ok. Let’s face it that I know nothing about an alarm system. I have an ADT system and a construction worker accidentally broke this small sensor at my basement door. Well after 2 hours of waiting, 4 transfers, and horribly exasperating experience with ADT and so solution. I simply looked on the Amazon for something that looked similar to me and I found this part. The order arrived quickly, it was simple to attach, and it works perfectly. I’m still planning to change from ADT because it’s just terrible.
A.Z. –
Needed replacement magnetic contacts
When our lower level of the house was re-modeled, the contactor did not save the contacts from two door moldings for my Ring and Insteon sensors. I got these just for the contacts and they work fine for my Ring and Insteon open/close sensors.
Richard Krimm Jr. –
Cheap but functional
Cheaply made. Had them come apart while installing. Product does work well.
Christopher Peckat –
Pretty much what I expected.
Terminals didn’t function correctly at first but with a little help they worked fine.
Michael –
Some of them did not work
Two contacts did not work at all. Poorly made.
Bill –
Replacement hardwired alarm door sensor
Easy to install. Plug and play.
P. Larsen –
Product matches price point for good and bad
These units are simple components with a single electric reed switch and two connectors. The plastic containers have no markings, the the hardware used to attach wires is low quality – out of my 5 I had one or two where the screw wouldn’t tighten or loosen.Also there’s no data-sheet (model name) for the used reed switch. It not known what voltage/current is acceptable but it’s common that these units can take 1A or more. I had one take 200mA/9V and I think it blew – it’s constantly conducting regardless of magnet. It would be good to know these data to implement using the proper resistors.The mount/case is actually well designed. There’s a protective shield that once you mount the active component, there’s no easy access to the wires. The magnet has a N/S which again is not marked. You can feel if you’re pushing the wrong pole; I recommend making a small mark so when you mount the unit you know the right direction.If you mount a single wire, you can easily get the electronic component exposed by gently yanking on it. This will allow you to change the reed switch if need be, or make other replacements as needed.
michael –
Pretty good reed switches
They work! They are normally open, not normally closed which is better for my automation products.Switch activation occurs at 1.25 inches from the magnet. Keeping the current very low and not using a super strong magnet should have these switches working a long time.
Atif Kadiri –
They are good but I ordered wrong oneThis one when door are closed they on . So order what you need
Benjamin Pieprzak –
Does exactly what they’re supposed to do. Used on a security system I pieced together. Works consistently
Posted Feedback –
I received five sensors. They are not sealed so water and moisture ingress would be a problem over time. But that’s actually irrelevant because not a single one worked from the jump! I connected a seemingly identical old sensor I already had from another manufacture to some existing alarm wiring and it worked flawlessly. Then I connected each of the five new ones from this package, and every single one either didn’t work at all or it was infuriatingly inconsistent! It would show closed then I’d take the magnet away and sometimes minutes later the sensor MIGHT show open, if it ever did. Then I’d bring the magnet back and sometimes it would close, other times nothing. SEVERE quality or design issues. Save yourself the headache and DO NOT BUY!
Ricardo –
Good
kit serrano –
I bought it to replace my window contacts for my alarm system. Unfortunately, I had to return the item. The contact overlaps when it is close. I couldn’t use it for my application.